Expand in the Item List and double click.In the Navigation pane, go to > (FX5UCPU in the example below) >.Your PLC is now ready and you can continue setting up the IXrouter by selecting a communication protocol. On a new row, select protocol 'TCP', select open system 'MC Protocol' and choose a Host Station Port Number between 1025-4999 or 5010-65534.Check the option ' Set Open Setting in Ethernet Configuration window' and press (indicated by #2).If you haven't already, enter an IP address for the CPU Module (indicated by #1) and a Subnet Mask Pattern (usually 255.255.255.0).In the Project Window, open > and go to the tab.This can be done by following the next steps: Setting up the CPU Module enables the PLC to communicate with an external device (i.e. iQ-F and iQ-R series are set up using GX Works3.L and Q series are set up using GX Works2.Manage variables (export, duplicate, remove)ĭepending on the type of Mitsubishi PLC you're using, the setup of the PLC has to be performed in either GX Works2 or GX Works3:.This article shows you how to do this for a Mitsubishi PLC in both MELSOFT GX Works2 and GX Works3.
This is done by selecting a communication protocol and defining the variables. The first step in Cloud Logging is setting up a data source. Please first activate Cloud Logging (or start the 30 day free trial) if you haven't already.
